$ ShopinJA Electronics $ => Desktop/Laptop Repair/Servicing and/or Services => Topic started by: JAtech on February 18, 2013, 11:34:07 PM $ ShopinJA Electronics $ => Desktop/Laptop Repair/Servicing and/or Services => Topic started by: JAtech on February 18, 2013, 11:34:07 PM|
Title: Toshiba issue Post by: JAtech on February 18, 2013, 11:34:07 PM HAVE A TOSHIBA LAPTOP THAT OVER HEATS AND CUTS OFF. THE FAN BLOWS OFTEN AND I SMELL A BURNING SMELL. LAPTOP STILL WORKS BUT LOOKING FOR A SOLUTION AND SOMEONE TO TEST FOR ANY OTHER ISSUE WITHOUT A LONG WAIT. IE ON THE SPOT NOT COMFORTABLE WITH LEAVING MY LAPTOP FOR PROLONGED PERIODS
INBOX ME IF YOUR ABLE TO HELP Title: Re: Toshiba issue Post by: rique on February 18, 2013, 11:35:41 PM HAVE A TOSHIBA LAPTOP THAT OVER HEATS AND CUTS OFF. THE FAN BLOWS OFTEN AND I SMELL A BURNING SMELL. LAPTOP STILL WORKS BUT LOOKING FOR A SOLUTION AND SOMEONE TO TEST FOR ANY OTHER ISSUE WITHOUT A LONG WAIT. IE ON THE SPOT NOT COMFORTABLE WITH LEAVING MY LAPTOP FOR PROLONGED PERIODS did you upgrade OS?INBOX ME IF YOUR ABLE TO HELP Title: Re: Toshiba issue Post by: JAtech on February 18, 2013, 11:44:57 PM NO I THINK THE FAN IS JUST BLOCKED.
Title: Re: Toshiba issue Post by: crisisinc on February 18, 2013, 11:47:32 PM HAVE A TOSHIBA LAPTOP THAT OVER HEATS AND CUTS OFF. THE FAN BLOWS OFTEN AND I SMELL A BURNING SMELL. LAPTOP STILL WORKS BUT LOOKING FOR A SOLUTION AND SOMEONE TO TEST FOR ANY OTHER ISSUE WITHOUT A LONG WAIT. IE ON THE SPOT NOT COMFORTABLE WITH LEAVING MY LAPTOP FOR PROLONGED PERIODS did you upgrade OS?INBOX ME IF YOUR ABLE TO HELP What that has to do with overheating tho? Title: Re: Toshiba issue Post by: rique on February 18, 2013, 11:52:35 PM HAVE A TOSHIBA LAPTOP THAT OVER HEATS AND CUTS OFF. THE FAN BLOWS OFTEN AND I SMELL A BURNING SMELL. LAPTOP STILL WORKS BUT LOOKING FOR A SOLUTION AND SOMEONE TO TEST FOR ANY OTHER ISSUE WITHOUT A LONG WAIT. IE ON THE SPOT NOT COMFORTABLE WITH LEAVING MY LAPTOP FOR PROLONGED PERIODS did you upgrade OS?INBOX ME IF YOUR ABLE TO HELP What that has to do with overheating tho? Title: Re: Toshiba issue Post by: crisisinc on February 18, 2013, 11:54:28 PM I see. My suggestion is that he gets a laptop cooling pad, they quite cheap and usb powered.
Title: Re: Toshiba issue Post by: the good guy on April 10, 2013, 03:03:14 PM you people are so young to this ... if the fan is working and the heat sink is seated then is the terminal paste / grease. No dam OS will make it over heat like that ... hold that :box: and :bat: ... fix yuh face :beye:
Title: Re: Toshiba issue Post by: HIGH-TECH JA on April 10, 2013, 03:06:35 PM you people are so young to this ... if the fan is working and the heat sink is seated then is the terminal paste / grease. No dam OS will make it over heat like that ... hold that :box: and :bat: ... fix yuh face :beye: :ia: Title: Re: Toshiba issue Post by: hustleking on April 15, 2013, 01:32:14 PM you people are so young to this ... if the fan is working and the heat sink is seated then is the terminal paste / grease. No dam OS will make it over heat like that ... hold that :box: and :bat: ... fix yuh face :beye: :ia: that os power theory is one of the dumbest things I've heard in my short lifetime Title: Re: Toshiba issue Post by: Crimson11 on May 28, 2013, 11:38:58 PM if you want i'll take alook at it and clean out the fan 291-3202
Title: Re: Toshiba issue Post by: GordonG on September 30, 2013, 03:00:55 PM Its the Heat Sink That Needs Cleaning for real, Not the Fan... Dumbest theory Ever... (No OS Upgrade can cause that so easily)
Fix them all the Time. only 15bills to take care of it.. simple thing 472-3716... Oh I have a store so U dont have to worry I've been doing this a long time.. Title: Re: Toshiba issue Post by: Crimson11 on September 30, 2013, 06:28:06 PM Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating
Title: Re: Toshiba issue Post by: jordanb89 on September 30, 2013, 07:13:14 PM Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating I do chip level repairs and yall just sum novice ! Os can cause the chip to trigger the overheating, especially the aero theme on windows 7 which draws more power and build more heat on the chip which then cause the heat sink not able to transfer enough heat tru the vent ! Take a look at dv6000 reload os7 on that after 2 to 6 weeks thats a no display machine ! reflow will then give u couple days, lucky can get even a month ! The chip is faulty anyways... replacing chip 70% lifespan, replacing board a 95% lifespan... Two things must take note of... If machine constantly overheating and shuts off clean vent (dust blockage), if machine screen not coming up check memory or u have a board issue (check Bios, Gpu or Clock generator oe check all supplies) !:tup: Title: Re: Toshiba issue Post by: cdwayne foremost on October 01, 2013, 08:10:20 AM :ia: now i can reply to this message ,only because of jordanb89 comment.yes, i as a technician totally agreed on what he has just explain to to all ,his theory on the dv6000 is also a fact ,and chip level repairs ,is also for advanced technicians ,i also do chip level repairs........................ :smo:
Title: Re: Toshiba issue Post by: the good guy on October 03, 2013, 09:51:52 PM Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating I do chip level repairs and yall just sum novice ! Os can cause the chip to trigger the overheating, especially the aero theme on windows 7 which draws more power and build more heat on the chip which then cause the heat sink not able to transfer enough heat tru the vent ! Take a look at dv6000 reload os7 on that after 2 to 6 weeks thats a no display machine ! reflow will then give u couple days, lucky can get even a month ! The chip is faulty anyways... replacing chip 70% lifespan, replacing board a 95% lifespan... Two things must take note of... If machine constantly overheating and shuts off clean vent (dust blockage), if machine screen not coming up check memory or u have a board issue (check Bios, Gpu or Clock generator oe check all supplies) !:tup: The only thing that will cause a machine to over heat is poor vents, fan not spinning fast enough or heat sink not seated properly. If a 3d desktop cause a system to over heat then the cooling system is messed up and would still do the same on any other OS if the machine is on long enough. I can fix this for free if i was idle enough, My skills and experience is way pass you and your petty comments. Oh yeah and what the F^&* is chip level repair ?are you going to rebuild the resistors in the processor ? use a blade to open it and bridge the l1 and l2 to slow it down and make it run cooler ? or are you just going to change the dam chip ? if so then my granny can do that . If you understands how a power supply works too you would know its parallel and not serial so the fan will always have the right voltage as long as the board is good and the bios is not messed up. Anyways no time for this crap and mango tree technicians Title: Re: Toshiba issue Post by: shane45 on October 03, 2013, 10:04:08 PM Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating I do chip level repairs and yall just sum novice ! Os can cause the chip to trigger the overheating, especially the aero theme on windows 7 which draws more power and build more heat on the chip which then cause the heat sink not able to transfer enough heat tru the vent ! Take a look at dv6000 reload os7 on that after 2 to 6 weeks thats a no display machine ! reflow will then give u couple days, lucky can get even a month ! The chip is faulty anyways... replacing chip 70% lifespan, replacing board a 95% lifespan... Two things must take note of... If machine constantly overheating and shuts off clean vent (dust blockage), if machine screen not coming up check memory or u have a board issue (check Bios, Gpu or Clock generator oe check all supplies) !:tup: not exactly sir... i have been using windows 7 ultimate 64bit on an hp dv6000(AMD) from march and i havent encountered any gpu or over heating probs whatsoever thus far :cof: Title: Re: Toshiba issue Post by: cdwayne foremost on October 03, 2013, 10:42:30 PM i did a reflow on a dv6000 and it lasted over a year and surprisingly its still working upon till this very day ,now thats amazing ....and its windows seven 64 bit .....thats the only part i not 100% agreed with jordon comment.
Title: Re: Toshiba issue Post by: jordanb89 on October 03, 2013, 10:51:57 PM Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating I do chip level repairs and yall just sum novice ! Os can cause the chip to trigger the overheating, especially the aero theme on windows 7 which draws more power and build more heat on the chip which then cause the heat sink not able to transfer enough heat tru the vent ! Take a look at dv6000 reload os7 on that after 2 to 6 weeks thats a no display machine ! reflow will then give u couple days, lucky can get even a month ! The chip is faulty anyways... replacing chip 70% lifespan, replacing board a 95% lifespan... Two things must take note of... If machine constantly overheating and shuts off clean vent (dust blockage), if machine screen not coming up check memory or u have a board issue (check Bios, Gpu or Clock generator oe check all supplies) !:tup: not exactly sir... i have been using windows 7 ultimate 64bit on an hp dv6000(AMD) from march and i havent encountered any gpu or over heating probs whatsoever thus far :cof: Heatsink works in conjunction with the fan...... Duh...any technician knows that the OS doesn't cause overheating I do chip level repairs and yall just sum novice ! Os can cause the chip to trigger the overheating, especially the aero theme on windows 7 which draws more power and build more heat on the chip which then cause the heat sink not able to transfer enough heat tru the vent ! Take a look at dv6000 reload os7 on that after 2 to 6 weeks thats a no display machine ! reflow will then give u couple days, lucky can get even a month ! The chip is faulty anyways... replacing chip 70% lifespan, replacing board a 95% lifespan... Two things must take note of... If machine constantly overheating and shuts off clean vent (dust blockage), if machine screen not coming up check memory or u have a board issue (check Bios, Gpu or Clock generator oe check all supplies) !:tup: The only thing that will cause a machine to over heat is poor vents, fan not spinning fast enough or heat sink not seated properly. If a 3d desktop cause a system to over heat then the cooling system is messed up and would still do the same on any other OS if the machine is on long enough. I can fix this for free if i was idle enough, My skills and experience is way pass you and your petty comments. Oh yeah and what the F^&* is chip level repair ?are you going to rebuild the resistors in the processor ? use a blade to open it and bridge the l1 and l2 to slow it down and make it run cooler ? or are you just going to change the dam chip ? if so then my granny can do that . If you understands how a power supply works too you would know its parallel and not serial so the fan will always have the right voltage as long as the board is good and the bios is not messed up. Anyways no time for this crap and mango tree technicians @crimson ur luckyy enough to have that still running or maybe u have the aero theme turn off +++ Am finish commenting on this cause i will disagree with u and u will disagree with me and cant take the one bag a talking ! We as technician encountered different types of issue each day and not all of them we can we can fix... changing Gpu is a micky mouse fix fa me ! WANT: All i want right now is some PCH chips ! get me some of them can send you the IDs ... Title: Re: Toshiba issue Post by: cdwayne foremost on October 03, 2013, 11:21:34 PM :box: WELL NO MATTER HOW TOUGH AND RUFF WE THINK WE ARE ,SORRY TO SAY BUT THEIRS ALWAYS SOMEONE ELSE OVER US THAT MAKES WE LOOK LIKE FRENCH FRIES ..... JUST LIKE ME ,I THOUGHT I WAS THE ONE AND ONLY REVERSE ENGINEER IN JAMAICA ,AND 3 DAYS AGO I MET SOMEONE ON THIS SITE ( I WONT SAY HIS NAME ) BUT HE MADE ME LOOK LIKE I AM JUST STARTING OUT AS A NEWBIE REVERSER .....AND TAKE A LOOK AT USAIN BOLD AND ,T.GAY...MY STATEMENT IS NOW OVER........ :cools:
|