ShopinJA Classifieds

 You will then need to take them outside, and as before hang them on the washing line to dry.Conclusion: If you are ever in any doubt then contact the supplier or manufacturer of the blinds or shades for advice or assistance. As long as you follow these guidelines when cleaning your blinds or shades you should have clean and new looking blinds that will enhance the décor of your room for years to come.Once you have managed to get all the dirt off you can then hose the blinds down and leave them to dry. Then using a cloth or sponge with some water and some washing up liquid, wipe them over.You can use a damp cloth to wipe them over, just be careful not to soak them. The best way to do this is to tilt the blinds so that the slats are flat.The only thing that is not recommended is to wash these blinds. Another good method is to use a vacuum cleaner with a brush attachment.Aluminium Venetian Blinds: As with wooden venetian blinds it is best to dust this type of blind on a regular basis to avoid a large build up of dust. You can them rinse them off with a shower attachment or by just running the shower.
This can be done in two ways.Unlike the wooden blinds you can use water and some kind of detergent on aluminium venetian blinds. Then place the blinds in the water and sponge them down until you have removed all the dirt.The second method is to fill the bathtub with enough warm soapy water to cover the blinds.Wood Venetian Blinds: The best way to keep wooden venetian blinds clean is to dust them on a regular basis. As the surface of the slats are smooth it?s a fairly easy job to wipe them down with a cloth or brush off the dust using a clean soft duster. By that I mean soaking them with water, because although these blinds are Aluminum Foil for Air Duct (http://www.hongchengtm.net/product/aluminum-foil-for-air-duct/) sealed, water and excessive dampness can cause the slats to warp.
 Again brush the dust off using a clean soft duster or a vacuum cleaner with a brush attachment. You will then need a bucket with warm soapy water and a sponge. Wipe the blinds front and back with the sponge until you have got all the dirt off them, being careful not to scrub too hard and damage the slats. The first method is to take the blinds outside, weather permitting and hang them on a washing line or something similar. You can also use a small paintbrush to dust the slats.If the blinds are particularly dirty, for example if they are in the kitchen and have become greasy and very dusty over a period of time, you will need to take the blinds down to clean them. As they are nearly dry it is a good idea to wipe them with a soft cloth or paper towel to remove any excess water. Avoid being too aggressive and accidentally damaging the slats Aluminium Foil Manufacturers (http://www.hongchengtm.net/) by bending them. If you bathtub is separate from the shower, fill the tub with enough clean water to rinse the blinds thoroughly. Another handy tip is to put a pair of cotton gloves or even an old pair of socks onto your hands and wipe the slats between your fingers.