ShopinJA Classifieds

Have one of these controllers its perfect for anyone thats building a meth kit or already have a meth set up and want to run in from in the cab and control the settings on hand

pretty easy to work with and instructions are available

CMGS controller
The display will show:
vacuum boost and duty cycle in real time and can inject based on Vacuum or Boost or MAF.
If you inject based on MAF you can display MAF as well.
The MAF range is 200 HZ to 11,000 HZ
The boost range is 1-30 PSI on this version,
vacuum range is -30 to 0.
The entire range is -30 to + 30 PSI.
The gauge is 2 and 1/16 inch round and fits in a standard gauge pod (not included).
With this version you can make the system inject at any dutycycle in a test mode just by toggling through a menu on the gauge. If you add the FSB (failsafe box) you can run dual pumps, or dual stages and add failsafe capability.
http://www.coolingmist.com/coolingmist/INSTRUCTIONS/CMGSSYSTEMX.PDF

(http://i53.photobucket.com/albums/g60/reebok2949/Mobile%20Uploads/CMGSBoostVAClarge_zpstvcjo3to.jpg) (http://s53.photobucket.com/user/reebok2949/media/Mobile%20Uploads/CMGSBoostVAClarge_zpstvcjo3to.jpg.html)
(http://i53.photobucket.com/albums/g60/reebok2949/Mobile%20Uploads/CMGSBoostVACimage7_zpsmfgmwfhv.jpg) (http://s53.photobucket.com/user/reebok2949/media/Mobile%20Uploads/CMGSBoostVACimage7_zpsmfgmwfhv.jpg.html)
(http://i53.photobucket.com/albums/g60/reebok2949/Mobile%20Uploads/CMGSBoostVACimage6_zpsl2ueh13u.jpg) (http://s53.photobucket.com/user/reebok2949/media/Mobile%20Uploads/CMGSBoostVACimage6_zpsl2ueh13u.jpg.html)
(http://i53.photobucket.com/albums/g60/reebok2949/Mobile%20Uploads/CMGSBoostVACimage2_zpsvhlnfr9z.jpg) (http://s53.photobucket.com/user/reebok2949/media/Mobile%20Uploads/CMGSBoostVACimage2_zpsvhlnfr9z.jpg.html)
(http://i53.photobucket.com/albums/g60/reebok2949/Mobile%20Uploads/CMGSBoostVACimage3_zpsbjm9lyka.jpg) (http://s53.photobucket.com/user/reebok2949/media/Mobile%20Uploads/CMGSBoostVACimage3_zpsbjm9lyka.jpg.html)

call 391-5235