ShopinJA Classifieds

MINT/NEW GOTECH Standalone ECU 55k! 8642681

Bought it brand New installed it on my Car then got the Newer version GOTECH PRO X and used that 1 instead.

Gotech MFI PRO v7 Information and Features
Applications:

- 4 Cylinder wasted spark (60 -2 or 24-1 Distributor pickup)
Two coil and two injector output

- 4 Cylinder wasted spark + MF (60 -2, 36-1 or 24-1 Distributor pickup)
Two coil and two injector output, One micro fueler output for extra set of staged injectors

- 4 Cylinder with distributor (Trigger per event or 60 -2)
Two injector and one coil output

- 6 Cylinder with distributor (Trigger per event or 60 -2)
Three injector and one coil output

- 6 Cylinder wasted spark (60 -2)
Three injector and three coil output

- 8 Cylinder with distributor (Trigger per event)
Two injector and one coil output

- 8 Cylinder two distributor (12-1 Lexus 1uz)
Two coil and two injector output. This setup is also available on a 60 -2 crank pickup. We recommend using 60 -2 if possible.



Two GPO outputs, one for fuel pump or shift light and one for VVT.
Tach output
Launch control (Launch RPM limiter, Launch timing retard, Launch time delay, Launch fuel add %)
Closed Loop lambda control (Narrow band)
 
Basic Kit Contents
The basic kit includes
- Gotech MFI PRO ecu
- Universal wiring harness
- Software package
- User manual
Dressed looms can be supplied on demand for vehicle specific applications.

Ignition Control Features
 
- Full Control over ignition timing at preset RPM intervals and 32 load sites
- Interpolation Between load sites for smooth timing transition
- Ignition control input provided by engine speed and manifold pressure (TPS also available)
- Soft touch RPM limiter is provided to prevent dangerously high RPM to be exceeded
- Ignition is fully programmable using serial link to Pc or laptop
- Windows based software
- Timing control up to 12000 rpm
 
Batch Firing of injectors in mode 0. Phased firing of injectors in mode 1 upwards. (Phased firing available for 2, 4 and 6 cylinder engines. Phased firing also available for twin rotor engines)
- Full control over electronic injectors over 32 load sites and preset RPM levels
- Interpolation Between load sites for smooth transition
- Able to drive 8x 2ohm injectors or 16x 16 ohm injectors
- Fuel injector time mapped at 500rpm from startup to 12 000rpm on a 4 cylinder engine
- Injector time is fully programmable using the windows based Gotech software

Sensor inputs
- Manifold air pressure (Built in 1,5 bar manifold pressure sensor, optional 3,0 bar map sensor available)
- Intake air temperature

Additional features include
- Offline tuning
- Files can be uploaded and stored on your computers hard drive for future use

Software Features
 
- Windows based. Can be used with Windows '98 , ME and XP
- User friendly interface with easy to navigate screens
- Dash panel for engine monitoring whilst online.
- Files can be downloaded an retrieved on hard drive
- Files can be uploaded to the MFI PRO and saved to the hard drive.
- Maps can be rapidly changed using the curve function or the all ranges up.
- Input screens include: Fuel, Ignition, F5 Configuration, Air temp correction, Water temp correction, Battery voltage correction and the micro staged fuel map.
- Online data logging with a sample rate of 30hz. Data is displayed on a user friendly field.

[attachment deleted by admin]

 :Bump:

 :Bump:

 :sold: