$ ShopinJA Auto $ => Engine/Transmission/Tuning => Topic started by: killer-miller on October 31, 2012, 11:26:55 AM $ ShopinJA Auto $ => Engine/Transmission/Tuning => Topic started by: killer-miller on October 31, 2012, 11:26:55 AM|
Title: b-series pistons Post by: killer-miller on October 31, 2012, 11:26:55 AM CTR pistons **used**
81mm 15k neg 828-2776 THIS KIT WILL FIT: Fits Honda B16A B16B B16A2, B17A, B18A/B, B18C GS-R or B18C5 Type R THESE PISTONS WILL NOT WORK IN B20B AND B20Z MOTORS. -------------------------------------------- These pistons are designed for High Compression All Motor Engines with a Compression ratio of 10.92:1 to 12.5:1 B16A Block and Head 10.95:1 B18A/B Block and Head 11.40:1 B18C1 Block and Head 12.40:1 B18C1 Block and B18c5/B16A Head 12.10:1 B18A/B Block with B18C1 Head 12.64:1 These pistons have Holes in the wrist pin bosses to improve oiling and superior lubrication. Piston skirts are fully coated for added protection aginst heat. Oem honda pistons only have 20 percent of the skirt coated. These pistons are domed to match hondas b16b piston. 40 Percent stronger than OEM honda cast pistons. These pistons have been tested to support over 350 WHP with the proper tuning and supporting mods. Title: Re: b-series pistons Post by: killer-miller on November 14, 2012, 09:00:56 AM :Bump:
+++ 15K PPL :Bump: Title: Re: b-series pistons Post by: killer-miller on November 15, 2012, 11:14:56 AM :Bump:
+++ :Bump: up your compression with these :guns: +++ :2t: Title: Re: b-series pistons Post by: killer-miller on November 23, 2012, 12:04:19 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on November 27, 2012, 09:24:45 AM :Bump:
Title: Re: b-series pistons Post by: killer-miller on November 29, 2012, 02:40:05 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 04, 2012, 10:27:31 AM :sa: :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 11, 2012, 01:31:29 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 13, 2012, 12:12:57 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 15, 2012, 09:24:46 AM :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 17, 2012, 08:51:31 AM :Bump: :cof:
+++ :Bump: Title: Re: b-series pistons Post by: killer-miller on December 18, 2012, 03:54:31 PM :Bump:
+++ :Bump: Title: Re: b-series pistons Post by: killer-miller on December 24, 2012, 10:38:05 AM :cof:
Title: Re: b-series pistons Post by: killer-miller on December 27, 2012, 02:13:07 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on December 31, 2012, 08:24:54 AM :cof:
Title: Re: b-series pistons Post by: killer-miller on January 25, 2013, 10:12:18 AM :Bump:
Title: Re: b-series pistons Post by: killer-miller on February 27, 2013, 11:55:59 AM Still here!!!
:Bump: Title: Re: b-series pistons Post by: killer-miller on March 23, 2013, 09:54:14 AM :Bump:
Title: Re: b-series pistons Post by: killer-miller on April 02, 2013, 12:40:55 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on April 09, 2013, 03:53:49 PM :Bump:
Title: Re: b-series pistons Post by: killer-miller on April 23, 2013, 08:45:20 AM :sold:
|