$ ShopinJA Electronics $ => Used Cellular Telephones => Topic started by: trackstar on June 20, 2012, 06:42:38 PM $ ShopinJA Electronics $ => Used Cellular Telephones => Topic started by: trackstar on June 20, 2012, 06:42:38 PM|
Title: need help with trackball Post by: trackstar on June 20, 2012, 06:42:38 PM jus bought a housing an trackball but still my trackball still not scrolling an clicking :( need some help plz
Title: Re: need help with trackball Post by: frazbox on June 20, 2012, 07:42:09 PM wow... more info... like which phone ur referring to
Title: Re: need help with trackball Post by: trackstar on June 20, 2012, 08:54:04 PM its a bold 1
Title: Re: need help with trackball Post by: Park$ on June 20, 2012, 08:59:38 PM Need a trackball sensor
Title: Re: need help with trackball Post by: trackstar on June 23, 2012, 12:50:37 AM what is a trackball censor and where can i get one?
Title: Re: need help with trackball Post by: Cellphone Unlock King on June 23, 2012, 07:33:17 AM yea, MAYBE it needs the trackball "select key" as I like to call it 8) ...but there is another issue in that the trackball isn't scrolling in any direction, so that's more than a "select key" issue. Have you looked to see if there is any signs of moisture or anything. Use a pin or sumn very sharp and flat and take out the "sensor" / "select key" . It's supposed to come out with the brownish coloured plastic. Look underneath it and see if it's corroded or anything. But normally that only affects clicking / selecting issue ... below is a picture of the trackball sensor .... 8) Replacing that is sumn else
(http://i185.photobucket.com/albums/x221/enyawbrown/bold9000trackballsensorunit.jpg) Title: Re: need help with trackball Post by: Park$ on June 23, 2012, 11:12:49 AM Mr Cellie about 3k I think
Title: Re: need help with trackball Post by: trackstar on June 24, 2012, 12:37:14 PM i bought one of the censor things too, the person that put in in realized that some little metal things on the board around the trackball break off so i would have to get the soldered on.
|